Home Recording of Electric Guitar with Pedalboard (hum noise & ground)

1. What you need for recording.
computer, daw, audio interface, electric guitar, pedal board, monitor speakers or monitor headphone, good cables.

2. The order of equipment connection
Guitar => pedal board (pre amp) => cab simulator pedal => audio interface => computer/DAW (if you dont have cab simulator you should buy plug in)

#. If you use pedals as a pre-amp like me, you need a cabinet simulator(pedal or plug-in)

•. patch cable & guitar cable & power supply, These are very important when recording without noise.

#. All of the above is satisfactory, but the noise may be severe when recording.

MUST CHECK THIS
1. ground connection (home / studio etc)
2. effects problems / Product defects
3. power cable (power supply to effectors)
4. power supply (ground)
5. patch cables.

revival drive custom

Strymon Zuma power supply

I also had a lot of noise problems. And I finally solved it with an electric ground. More than 80% of the noise in the drive pedal has disappeared. Musicians can't be free from electricity and ground.

I will send a power supply to the place of purchase to request a repair.

If there is any noise after all the tests, you must doubt the pedalboard or power supply. Noise is a tremendous stress on all players. I hope it helped.